CUMMINS N14 Specifikace stáhnout pdf (Strana 107)

100

101

NOTE: The injection timing can be changed by removing the

cam follower housing and by increasing or decreasing the

gasket thickness. Each 0.18 mm [0.007-inch] of gasket thick-

ness affects injection timing by approximately 0.05 mm

[0.002-inch] indicator travel.

NOTE: Gaskets are available in the following nominal thick-

nesses:

1. 0.18 mm [0.007-inch].

2. 0.43 mm [0.017-inch].

3. 0.43 mm [0.017-inch] (Print-O-Seal*).

4. 0.56 mm [0.022-inch].

5. 0.76 mm [0.030-inch].

*One Print-O-Seal gasket must be used for each cam

follower housing.

Increase the gasket thickness to advance the injection

timing (Add = Advance).

Decrease the gasket thickness to retard the injection

timing (Remove = Retard).

Engine Assembly (00-02) Injection Timing - General Information

N14 Page 0-87

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 586 587

Komentáře k této Příručce

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Specifikace Strana 107

Komentáře k této Příručce