CUMMINS N14 Specifikace stáhnout pdf (Strana 402)

100

101

Measure the inside diameter of the thermostat seal count-

erbore in the thermostat housing.

Thermostat Seal Bore I.D.

mm in

67.39 MIN 2.653

67.46 MAX 2.656

Use a depth micrometer or a depth gauge, Part No.

3823495, to measure the depth of the seal counterbore in

the thermostat housing.

Thermostat Seal Bore Depth

mm in

42.16 MIN 1.66

42.67 MAX 1.68

Assembly

Caution: When installing a new seal, the flat side of the

seal must be toward the mandrel for correct installation.

Use thermostat seal mandrel, Part No. ST-1225, and a

lead hammer to install the seal.

A counterbore in the housing bore locates the seal.

Install the thermostat in the cover.

Install a new gasket on the thermostat housing.

Install the thermostat cover and the four mounting cap-

screws.

Tighten the capscrews.

Torque Value: 47 N•m [35 ft-lb]

Install the CELECT™ coolant temperature sensor into the

thermostat housing.

Torque Value: 34 N•m [25 ft-lb]

Thermostat Housing - Cleaning and Inspection (08-05) Cooling System

N14Page 8-22

1 2 ... 397 398 399 400 401 402 403 404 405 406 407 ... 586 587

Komentáře k této Příručce

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Specifikace Strana 402

Komentáře k této Příručce