CUMMINS N14 Specifikace stáhnout pdf (Strana 364)

100

101

Use a cutting oil, and cut the bore in both bushings in the

oil pump body.

NOTE: Do not push down on the drill motor. The feed

mechanism in the boring tool will move the boring bar.

Stop the drill motor, and move the feed control lever to the

‘‘OFF’’ position.

Pull up on the drive shaft to remove the tool bit from the

bore.

Remove the boring tool from the oil pump body.

NOTE: The tool bit must move through the slot in the guide

bushing. Do not allow the tool bit to hit against the guide

bushing.

Clean the metal particles from the oil pump body.

Install the cover on the oil pump body.

Install the boring tool to the pump body.

NOTE: Use the long capscrews and the nuts to fasten the

tool to the oil pump body.

Lubricating Oil Pump Body and Cover Bushing - Replacement (07-07) Lubricating Oil System

N14Page 7-22

1 2 ... 359 360 361 362 363 364 365 366 367 368 369 ... 586 587

Komentáře k této Příručce

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Specifikace Strana 364

Komentáře k této Příručce