CUMMINS N14 Specifikace stáhnout pdf (Strana 370)

100

101

Assembly

Use gear and spacer mandrel, Part No. ST-1157, to install

the driven shaft into the oil pump body as follows:

1. Lubricate the large outside diameter of the driven shaft

with clean 15W-40 oil.

2. Install the large outside diameter of the driven shaft

into the bore in the oil pump body.

3. Use an arbor press and the gear and spacer mandrel

to push the shaft into the bore.

4. Measure the amount of shaft protrusion above the oil

pump cover mounting surface.

Driven Shaft Protrusion

mm in

17.90 MIN 0.705

18.67 MAX 0.735

Lubricating Oil Cooler Assembly -

Rebuild (07-11)

Disassembly

Remove the four filter head 12 point capscrews and the

filter head.

Remove the coolant filter shutoff valve retaining capscrew

and washer.

Remove the shutoff valve and the o-ring.

Lubricating Oil Cooler Assembly - Rebuild (07-11) Lubricating Oil System

N14Page 7-28

1 2 ... 365 366 367 368 369 370 371 372 373 374 375 ... 586 587

Komentáře k této Příručce

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Specifikace Strana 370

Komentáře k této Příručce