CUMMINS N14 Specifikace stáhnout pdf (Strana 232)

100

101

NOTE: After the camshaft has been steam cleaned, do not

touch the machined surfaces with bare hands. This will

cause rust to form. Lubricate the camshaft with clean 15W-

40 oil before handling.

Inspection

Visually inspect the valve and injector lobes for damage.

NOTE: Cummins Engine Company, Inc. does not recom-

mend repairing camshafts by grinding the valve or injector

lobes.

If the camshaft is damaged, it must be replaced.

Visually inspect the camshaft gear for cracks, chipped, or

broken teeth.

Use a feeler gauge to measure the clearance between the

gear and the shoulder on the camshaft.

NOTE: The clearance must not exceed 0.13 mm

[0.005-inch].

Camshaft - Cleaning and Inspection (01-17) Cylinder Block

N14Page 1-64

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 586 587

Komentáře k této Příručce

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Specifikace Strana 232

Komentáře k této Příručce