CUMMINS N14 Specifikace stáhnout pdf (Strana 378)

100

101

Install the oil cooler bypass valve into the transfer housing.

Place the spacer plate and a new spacer gasket on the

oil cooler support. Use two of the connection retainer

capscrews to keep the gasket and plate loosely aligned

on the support.

Install the transfer housing, a new transfer connection

gasket, and the six capscrews that hold the oil cooler

support to the oil cooler transfer housing. Tighten the

capscrews.

Torque Value: 47 N•m [35 ft-lb]

Install the connection retainer and o-ring adapters with

new o-rings. Do not tighten the four retainer capscrews

at this time. Adapters must be loose so they will align with

the transfer tubes.

NOTE: Be careful to keep o-rings in place when installing

the adapters and retainer.

Installation - Oil Cooler Core

Lubricate new o-rings with vegetable oil, and install on

the oil cooler core transfer tubes.

Lubricating Oil Cooler Assembly - Rebuild (07-11) Lubricating Oil System

N14Page 7-36

1 2 ... 373 374 375 376 377 378 379 380 381 382 383 ... 586 587

Komentáře k této Příručce

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Specifikace Strana 378

Komentáře k této Příručce